LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Trax Premier, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Engine Controls And Fuel - 1.4L (LE2) - Repair Instructions) >> Repair Instructions >> Vacuum Pump Seal Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM3687004
    NOTE:

    Ensure the vacuum pump seal does not deform during the installation procedure.

    Install the NEW vacuum pump seal (1) to the DT-45866  Seal Installer (2).

  2. GM3687000

    Install the NEW vacuum pump seal using the DT-45866  Seal Installer.

  3. Engine Control Module Replacement  - Install
  4. Vacuum Pump Assembly Replacement  - Install
scientia non olet · About LEMON Manuals