LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Trax Premier, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Engine Controls And Fuel - 1.4L (LE2) - Repair Instructions) >> Repair Instructions >> Fuel Tank Fuel Pump Module Replacement (FWD) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM2772378

    Install a NEW fuel tank fuel pump module O-ring gasket (1).

  2. Install the fuel tank fuel pump module (2).
  3. GM2772310

    Lower the fuel pump module (2) into the fuel tank while connecting the fuel tank vent pipe (1) to the fuel pump module. Plastic Collar Quick Connect Fitting Service 

  4. GM2770610

    Install the fuel tank fuel pump module lock ring (1) to the fuel tank (2).

  5. Using the CH-45722  Tool-Fuel Sender Lock Ring and a long breaker-bar, rotate the fuel pump module lock ring (1) in a clockwise direction in order to lock the lock ring.
  6. Connect the evaporative emission hoses. Plastic Collar Quick Connect Fitting Service 
  7. Connect the fuel feed pipe. Plastic Collar Quick Connect Fitting Service 
  8. Connect the electrical connector.
  9. Install the fuel tank. Fuel Tank Replacement (FWD) Fuel Tank Replacement (AWD) 
scientia non olet · About LEMON Manuals