LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Trax Premier, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Engine Controls And Fuel - 1.4L (LE2) - Repair Instructions) >> Repair Instructions >> Fuel Tank Filler Pipe Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM2884056

    Install the fuel tank filler pipe (4) to the vehicle.

  2. CAUTION:

    Refer to Fastener Caution .

  3. Install the fuel tank filler pipe fastener (3) and tighten to 9 N.m (80 lb in).
  4. Connect the fuel tank filler pipe quick connect fitting (1). Refer to Plastic Collar Quick Connect Fitting Service .
  5. Install the fuel tank filler pipe clamp (2).
  6. Lower the vehicle.
  7. GM2884054

    Install the fuel tank filler pipe fastener (1) and tighten to 9 N.m (80 lb in).

  8. Install the right rear wheelhouse panel liner. Refer to Rear Wheelhouse Liner Replacement .
  9. Install the right rear tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  10. Fill the fuel tank.
  11. Install the fuel cap.