LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Trax Premier, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Engine Controls And Fuel - 1.4L (LE2) - Repair Instructions) >> Repair Instructions >> Fuel Injector Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM3324318

    Install the EN-51146-2-5  calibrations tools (4) to the fuel injectors (3).

  2. Lightly coat the fuel injector seal (2) with clean engine oil.
  3. Fuel Injector(2)@Fuel Injection Fuel Rail(1) - Install
  4. Apply thread lock agent to the NEW fuel injector bolts. Refer to Adhesives, Fluids, Lubricants, and Sealers .
    5. CAUTION:

    Refer to Fastener Caution .

  5. Install the NEW fuel injector bolts to the fuel injectors (3) and tighten to 5 N.m (44 lb in).
  6. Connect the 4 fuel injector electrical connectors (5).
  7. Fuel Injection Fuel Rail Assembly Replacement  - Install
scientia non olet · About LEMON Manuals