Removal Procedure
WARNING: This page is about a different car, the 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
- Relieve the fuel system pressure. - Fuel Pressure Relief
- Battery Negative Cable Disconnection and Connection (without KL9)Battery Negative Cable Disconnection and Connection (with KL9) - Disconnect
- Intake Manifold Cover Replacement - Remove
Cable Tie(1) - Remove and DISCARD
- Disconnect the electrical connector.(2)
Fuel Injection Fuel Rail Fuel Pressure Sensor(1) - Remove and DISCARD
WARNING:
Refer to Diesel/Gasoline Vapors Warning .
WARNING:
Refer to Safety Goggles and Fuel Warning .
CAUTION:
Refer to Fuel and Evaporative Emission Hose/Pipe Connection Cleaning Caution .
NOTE:
Replace the noise cancelling foam component if it is exposed to and has absorbed automotive fluids.