Installation Procedure
WARNING: This page is about a different car, the 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
Fuel Feed Pipe (1) @ Retainer (2) - Install [5x]
- Fuel Feed Pipe (1) @ Fuel Feed Pipe (2) - - Connect - Plastic Collar Quick Connect Fitting Service .
Fuel Tank Protector (2) - Install
- Fuel Tank Protector Nut (1) - Install and tighten [3x] 22 N.m (16 lb ft)
Parking Brake Cable (2) - Install
- Parking Brake Cable Nut (1) - Install and tighten 22 N.m (16 lb ft)
Underbody Cross Sill Shield (2) - Install
- Underbody Cross Sill Shield Nut (1) - Install and tighten [2x] 3.5 N.m (31 lb in)
- Lower the vehicle.
Fuel Feed Pipe (1) @ Retainer (2) - Install [2x]
- Fuel Feed Front Pipe Replacement , - Connect - Metal Collar Quick Connect Fitting Service
- Intake Manifold Cover Replacement - Install
CAUTION:
Refer to Fastener Caution .