Crankshaft Position Sensor Replacement (AWD)

WARNING: This page is about a different car, the 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.

Callout	Component Name
Preliminary Procedure Raise and support the vehicle. Lifting and Jacking the Vehicle Transfer Case Replacement
1	Crankshaft Position Sensor Bolt CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb in)
2	Crankshaft Position Sensor Procedure Disconnect the electrical connector.

Callout

Component Name

Preliminary Procedure

Raise and support the vehicle. Lifting and Jacking the Vehicle
Transfer Case Replacement

Crankshaft Position Sensor Bolt

CAUTION:

Refer to Fastener Caution .

Tighten
10 N.m (89 lb in)

Crankshaft Position Sensor
Procedure
Disconnect the electrical connector.