LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Trax Premier, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Engine Controls And Fuel - 1.4L (LE2) - Diagnostic Information And Procedures (P0010-P06B6)) >> Diagnostic Information and Procedures >> DTC P0112, P0113, or P0114 >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different car, the 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

The scan tool display range is between -40 and +150°C (-40 and +302°F).

P0112 

The ECM detects that the IAT sensor signal is warmer than 149°C (300°F) for at least 5 s.

P0113 

The ECM detects that the IAT sensor signal is colder than -60°C (-76°F) for at least 5 s.

P0114 

Where this DTC is used, the ECM detects that the IAT sensor signal is intermittent or has abruptly changed for at least 5 s.