LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Trax Premier, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Engine Controls And Fuel - 1.4L (LE2) - Diagnostic Information And Procedures (P0010-P06B6)) >> Diagnostic Information and Procedures >> DTC P00F4-P00F6 >> Component Testing

Component Testing

WARNING: This page is about a different car, the 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.

Multifunction Intake Air Sensor

  1. Test the Intake Air Humidity Sensor by varying the air humidity in the intake duct near the sensor, while observing the scan tool Intake Air Humidity Sensor parameter. The parameter should change and be within 5 - 95%.
    • If not within the specified range 

      Replace the B75C Multifunction Intake Air Sensor.

    • Go to next step: If within the specified range 
  2. All OK.
scientia non olet · About LEMON Manuals