Conditions for Setting the DTC

P1516

• The following parameters are not within 2% of each other:
  • Desired Throttle Position
  • Throttle Position

DTC P2101 Condition 1

• The following parameters are not within 10% of each other:
  • Desired Throttle Position
  • Throttle Position

Condition 2

• Throttle Position Learn = Active
• Throttle Position = Greater than 36%

Condition 3

• Reduced Engine Power = Active
• Throttle Position = Greater than 35%

P2119 

The throttle blade has not reached the closed position after the engine has been turned off.

P2176 

Minimum Throttle Position Not Learned = Exceeded Number of Attempts