Conditions for Running the DTC
WARNING: This page is about a different car, the 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
P1516
- DTC P0606, P1682 = Not set
- Ignition Voltage = Greater than 6.4 V
- Reduced Engine Power = Not Activated
- Desired Throttle Position = Steady State - For greater than 4 s
DTC runs continuously when the above conditions are met.
P2101Condition 1
- DTC P0606, P1682 = Not set
- Ignition Voltage = Greater than 6.4 V
- Reduced Engine Power = Not Activated
- Engine = Running
Condition 2
- Engine = Not Running
- Ignition Voltage = Greater than 8.4 V
- Throttle Position = Learned
- Throttle Actuator Control System = Active
- Battery Saver Mode = Not Activated
DTC runs continuously when the above conditions are met.
P2119
- DTC P0122, P0123, P0222, P0223, P06A3 = Not set
- Battery Saver Mode = Not Activated
- Reduced Engine Power = Not Activated
- Ignition Voltage = Greater than 5.5 V
- Throttle Actuator Control System = Not Activated
DTC runs continuously when the above conditions are met.
P2176
- Ignition Voltage = Greater than 6.4 V
- Reduced Engine Power = Not Activated
- Throttle Position Learn = Active
DTC runs continuously when the above conditions are met for greater than 2 s.