LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Trax Premier, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Engine Mechanical - 1.4L (LE2)) >> Repair Instructions - On Vehicle >> Timing Chain Oil Nozzle Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure that the timing chain oil nozzle is clean and free of debris. Camshaft Timing Chain and Sprocket Cleaning and Inspection 
  2. GM3978605
    CAUTION:

    Refer to Component Fastener Tightening Caution .

    Install the timing chain oil nozzle (1). Tighten to 15 N.m (11 lb ft).

  3. GM3977673
    CAUTION:

    Refer to Fastener Caution .

    Install the timing chain guide (2) and bolts (1). Timing Chain Upper Guide Replacement 

  4. GM3977683

    Inspect the timing chain marks to confirm they remained aligned after engaging the timing chain tensioner.

  5. Using a suitable tool, rotate the crankshaft one complete engine cycle then verify the timing chain marks (1, 2 and 3) are aligned properly.
  6. Install the engine front cover. Engine Front Cover Replacement 
scientia non olet · About LEMON Manuals