Installation Procedure
WARNING: This page is about a different car, the 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
- CAUTION:
Refer to Fastener Caution .
Timing Chain Guide(2) - Install
- Timing Chain Guide Fastener(1) - Install and tighten[3x] 10 N.m (89 lb in)
Release the tensioner plunger (1). Timing Chain Tensioner Replacement
Inspect the timing chain marks (1, 2, and 3) to confirm they remained aligned after engaging the timing chain tensioner.
Remove camshaft holding tool EN-51367 (1).
- Using a suitable tool, rotate the crankshaft one complete engine cycle then verify the timing chain marks are aligned properly.
- Engine Front Cover Replacement - Install