LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Trax Premier, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Engine Mechanical - 1.4L (LE2)) >> Repair Instructions - On Vehicle >> Oil Pump Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. Upper Oil Pan Replacement  - Remove
  2. GM3985246

    Push the oil pump drive chain tensioner (1) in direction of arrow.

  3. Lock the tensioner using a suitable tool (2).
  4. If replacing the oil pump, remove the oil pump flow control solenoid valve. Oil Pump Flow Control Solenoid Valve Replacement 
  5. GM3985297
    NOTE:

    It may be necessary to leave one fastener in the pump assembly to secure the pump prior to removing it from the engine.

    Remove all EXCEPT one of the oil pump fasteners (1) securing the oil pump (2).

  6. GM3985346
    NOTE:

    The last oil pump fastener should be removed while simultaneously tilting the pump in the direction of the arrow.

    Remove the remaining oil pump fastener.

  7. Remove the oil pump (1).
  8. GM3985367

    Remove and DISCARD the oil pump seals (1).

scientia non olet · About LEMON Manuals