LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Trax Premier, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Engine Mechanical - 1.4L (LE2)) >> Repair Instructions - On Vehicle >> Oil Pump Drive Chain Tensioner Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM3985120
    NOTE:

    Ensure the tensioner spring is retained in the correct position prior to installation.

    Install the oil pump drive chain tensioner (2).

  2. CAUTION:

    Refer to Fastener Caution .

  3. Install the oil pump drive chain tensioner bolt (1) and tighten to 10 N.m (89 lb in).
  4. GM3985148

    Remove the suitable tool (2) from the oil pump drive chain tensioner (1).

  5. Engine Front Cover Replacement  - Install