LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Trax Premier, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Engine Mechanical - 1.4L (LE2)) >> Repair Instructions - On Vehicle >> Hydraulic Valve Lash Adjuster Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. Hydraulic Valve Lash Adjuster Arm Replacement  - Remove
  2. GM3982783
    NOTE:

    Many internal engine components will develop specific wear patterns on their friction surfaces. Components MUST be separated, marked, or organized in a way to ensure installation to their original location and position. Take precautions in order to prevent interchanging of parts.

    Tag or mark each part immediately when removed. Indicate location, direction, or orientation when necessary.

  3. Hydraulic Valve Lash Adjuster(1)[16x] - Remove
scientia non olet · About LEMON Manuals