LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Trax Premier, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Engine Mechanical - 1.4L (LE2)) >> Repair Instructions - On Vehicle >> Hydraulic Valve Lash Adjuster Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM3982783

    Install the 16 hydraulic valve lash adjusters (1) in the bores in the cylinder head.

  2. Apply lubricant to the 16 hydraulic valve lash adjusters (1). Adhesives, Fluids, Lubricants, and Sealers .
  3. Hydraulic Valve Lash Adjuster Arm Replacement  - Install
scientia non olet · About LEMON Manuals