LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Trax Premier, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Engine Mechanical - 1.4L (LE2)) >> Repair Instructions - On Vehicle >> Drive Belt Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4092315

    Apply tension to the drive belt tensioner (1) by rotating counterclockwise and hold tension.

    2. NOTE:

    Navigate the belt (2) past the engine mount bracket (3) and properly install.

  2. Drive Belt (2) - Install
  3. Slowly release the tension on the drive belt tensioner.(1)
  4. Inspect the drive belt for proper installation and alignment.
  5. Front Wheelhouse Liner Replacement (Chevrolet)Front Wheelhouse Liner Replacement (Buick) - Install
  6. Lower the vehicle.
scientia non olet · About LEMON Manuals