LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Trax Premier, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Engine Mechanical - 1.4L (LE2)) >> Repair Instructions - On Vehicle >> Crankshaft Position Sensor Reluctor Ring Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM3983043
    CAUTION:

    Do not allow the crankshaft position sensor reluctor ring to come into contact with external magnetic fields or sharp metal objects. Do not drop the crankshaft position sensor reluctor ring. Do not damage the rubberized encoder track. Failure to follow these precautions may cause damage to the component.

    NOTE:

    Ensure that the crankshaft reluctor ring alignment hole indicated by arrows properly aligns with the hole in the crankshaft (2).

    Install the crankshaft position sensor reluctor ring.(1)

  2. Automatic Transmission Flex Plate Replacement  - Install
scientia non olet · About LEMON Manuals