Intake Manifold Installation
WARNING: This page is about a different car, the 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Intake Manifold Gasket
NOTE:
Use a NEW gasket. Ensure the mating surfaces are clean and free of debris. |
| 2 | Intake Manifold |
| 3 | Intake Manifold Bolt[5x]
CAUTION:
Refer to Fastener Caution .
NOTE:
Bolt retainers keep the bolts in position on the assembly. Procedure Tighten the bolts in sequence. Tighten 15 N.m (11 lb ft) |