Intake Manifold Cleaning and Inspection
WARNING: This page is about a different car, the 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
|
Preliminary Procedure
|
|
| 1 | Intake Air Pressure and Temperature Sensor Bolt
CAUTION:
Refer to Fastener Caution . Tighten 5 N.m (44 lb in) |
| 2 | Intake Air Pressure and Temperature Sensor |
| 3 | Evaporative Emission Canister Purge Tube Assembly |
| 4 | Evaporative Emission Canister Purge Valve |
| 5 | Intake Manifold |