LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Trax Premier, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Engine Mechanical - 1.4L (LE2)) >> Repair Instructions - Off Vehicle >> Engine Block Cleaning and Inspection >> Measuring Cylinder Bore Diameter

Measuring Cylinder Bore Diameter

WARNING: This page is about a different car, the 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4972

    Using EN-8087  gauge, measure the cylinder bore diameter 35 mm (1.378 in) down from deck face perpendicular to the crankshaft centerline. Refer to Engine Mechanical Specifications .

  2. In the cylinder bore diameter is outside the specification the engine block must be replaced.
scientia non olet · About LEMON Manuals