LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Trax Premier, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Engine Mechanical - 1.4L (LE2)) >> Repair Instructions - Off Vehicle >> Engine Block Cleaning and Inspection >> Cleaning Procedure

Cleaning Procedure

WARNING: This page is about a different car, the 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure proper use of room temperature vulcanizing (RTV) sealant.Properly clean all RTV surfaces, Refer to Use of Room Temperature Vulcanizing (RTV) and Anaerobic Sealant .
  2. Remove any old thread sealant, gasket material or sealant using EN-28410  remover.
  3. Clean all the following areas with solvent:
    • Sealing surfaces
    • Cooling passages
    • Oil passages
    • Bearing journals
  4. Clean all threaded and through holes with solvent.
    5. WARNING:

    Refer to Safety Glasses Warning .

  5. Dry the engine block with compressed air.
scientia non olet · About LEMON Manuals