Cylinder Head Installation
WARNING: This page is about a different car, the 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Cylinder Head Gasket
NOTE:
Ensure that the cylinder head and the engine block sealing surfaces are clear of oil, grease, and old gasket material. |
| 2 | Cylinder Head Assembly |
| 3 | Cylinder Head Bolt (Qty: 10)
CAUTION:
Refer to Fastener Caution .
CAUTION:
Refer to Torque-to-Yield Fastener Caution . Procedure Tighten the NEW cylinder head bolts in the sequence shown.
Special Tools EN-45059 - A Angle Meter For equivalent regional tools, refer to Special Tools . |