Catalytic Converter Replacement (2H0)
| Callout | Component Name |
|---|---|
|
WARNING:
Refer to Exhaust Service Warning .
WARNING:
Preliminary Procedure Remove the catalytic converter heat shield. Refer to Catalytic Converter Heat Shield Replacement (2H0) .Refer to Protective Goggles and Glove Warning . |
|
| 1 | Catalytic Converter to Exhaust Front Pipe Fastener (Qty: 3)
CAUTION:
Refer to Fastener Caution Tighten 22 N.m (16 lb ft) |
| 2 | Exhaust Front Pipe |
| 3 | Catalytic Converter to Exhaust front Pipe Gasket |
| 4 | Exhaust Manifold Brace Fastener (Qty: 4) Tighten 20 N.m (15 lb ft) |
| 5 | Catalytic Converter |
| 6 | Exhaust Manifold Brace |
| 7 | Heated Oxygen Sensor Tighten 42 N.m (31 lb ft) |
| 8 | Catalytic Converter to Cylinder Head Fastener (Qty: 9) Tighten 20 N.m (15 lb ft) |
| 9 | Catalytic Converter to Cylinder Head Gasket |