Backup Lamp Switch Replacement

Callout	Component Name
Preliminary Procedures Disconnect the negative battery cable. Battery Negative Cable Disconnection and Connection (without KL9)Battery Negative Cable Disconnection and Connection (with KL9) Raise and support the vehicle. Lifting and Jacking the Vehicle
1	Backup Lamp Switch CAUTION: Refer to Component Fastener Tightening Caution . Procedure Disconnect the electrical connector. Tighten 25 N.m (18 lb ft)

Callout

Component Name

Preliminary Procedures

Backup Lamp Switch

CAUTION:

Procedure
Disconnect the electrical connector.
Tighten
25 N.m (18 lb ft)