Transmission Control Replacement
| Callout | Component Name |
|---|---|
|
Preliminary Procedures
WARNING:
After installing the transmission range selector shift cable, pull up and push down on ALL connections to verify that the connections are fully seated and properly engaged. Failure to perform this task can result in the vehicle not being able to shift into PARK causing potential vehicle damage and bodily injury. |
|
| 1 | Transmission Control Fastener (Qty: 4)
CAUTION:
Refer to Fastener Caution . Tighten 9 N.m (80 lb in) |
| 2 | Transmission Control |