LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Trax LT, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Infotainment >> Cellular System, Entertainment System, And Navigation System - Diagnostic Information And Procedures >> Diagnostic Information and Procedures >> Speaker Malfunction (UQA) >> Conditions for Running the DTC

Conditions for Running the DTC

NOTE:

DTC B1325 must not be set as current for the amplifier to run any of the following tests.

DTC B1025 01, B1065 01, B1075 01, B1085 01, B1095 01 

The test is run initially upon amplifier wake-up, and periodically every one second after amplifier operation begins.

DTC B1025 02, B1065 02, B1075 02, B1085 02, B1095 02 

The test is run initially upon amplifier wake-up, and periodically every one second after amplifier operation begins.

DTC B1025 04, B1065 04, B1075 04, B1085 04, B1095 04 

The test is run once during amplifier wake-up.

scientia non olet · About LEMON Manuals