LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Trax LT, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Headlights >> Lighting System - Diagnostic Information And Procedures >> Diagnostic Information and Procedures >> DTC B2580 >> Conditions for Setting the DTC

Conditions for Setting the DTC

DTC B2580 01 

The BCM detects a short to voltage in the headlamp high beam relay control circuit.

DTC B2580 02 

The BCM detects a short to ground in the headlamp high beam relay control circuit.

DTC B2580 04 

The BCM detects an open in the headlamp high beam relay control circuit.

scientia non olet · About LEMON Manuals