Instrument Cluster Configuration (with RPO UDV)

The instrument cluster is highly interactive and reconfigurable. The operator can select from four different display configures and each of these configuration may contain one, two, or three separate display zones. Regardless of which configuration is selected, the vehicle odometer and PRNDL are always displayed in the lower left and lower right corners of the display.

The different display configurations are:

• Simple - The most basic of the available configurations, the Simple configuration includes four static information display zones and one interactive information display zone. The infotainment display zone is located on the left side of the display and displays phone, turn-by-turn navigation, and audio information. The speedometer and compass are located in the upper middle of the display. On the right side of the display is a graphical representation of the fuel level and fuel range.

  Below the speedometer, in the lower middle of the display, is the interactive information display zone. The information display zone contains multiple pages that can be scrolled through and selected using the steering wheel mounted driver information center switch.

• Performance - The Performance configuration contains three static information zones, one interactive information display zone, and one interactive application display zone. The speedometer and tachometer/fuel level gauge are located on the left and right of the display. In between the speedometer and tachometer is a static information display zone that displays current information while the operator scrolls through other pages in the interactive application display zone.

  In the middle of the speedometer is an interactive information display zone. This display zone has a limited number of selection and will only display a digital speedometer, a navigation map, a settings page with sub-menus, or a blank page.

  Below the tachometer and extending into the lower middle of the display is an interactive application display zone. The application display zone allows access to the navigation application, audio application, phone application, settings application, or information application. Unlike the information display zone that is located within the speedometer, the information application is fully featured and allows access to all available information pages.

• Balanced - The Balanced configuration contains three static information zones, two interactive information display zones, and one interactive application display zone. The tachometer is located on the left side of the display, the speedometer in the middle, and the coolant temperature/fuel level gauge on the right.

  Located in the tachometer is an interactive information display zone.

  In the speedometer is an interactive information display zone. This display zone has a limited number of selection and will only display a digital speedometer, a navigation map, a settings page with sub-menus, or a blank page.

  An interactive application display zone is located in the coolant temperature/fuel level gauge. The application display zone allows access to the navigation application, audio application, phone application, or settings application.

• Enhanced - The Enhanced configuration contains four static information zones, two interactive information display zones, and one interactive application display zone. The speedometer in the upper middle of the display, a navigation map or compass in located on the upper left, and a fuel level gauge and fuel range display on the right.

  Located on the left and right lower portion of the display are interactive information display zones.

  An interactive application display zone is located in the middle of the display. The application display zone allows access to the navigation application, audio application, phone application, or settings application.