LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Traverse LT, FWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Rear Seat Removal and Installation (60%)

Rear Seat Removal and Installation (60%)

GM4754561
Callout Component Name
1 Rear Seat Track Cover
2 Rear Seat Bolt [5x]
CAUTION:

Refer to Fastener Caution .


Tighten 
45 N.m (33 lb ft)
3 Rear Seat

Procedure

  1. Disconnect electrical connections, if applicable.
  2. Fold the rear seat back cushion down to gain access to the rear seat bolts.
  3. With the aid of an assistant remove the rear seat, by lifting and pulling the seat upward to disengage it from the floor.
scientia non olet · About LEMON Manuals