LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Traverse LT, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays And Gauges >> Diagnostic Information and Procedures >> DTC P250A >> Circuit/System Verification

Circuit/System Verification

  1. Verify proper engine oil level.
    • If not at proper level 

      Add oil as necessary.

    • Go to next step: If at proper level 
  2. Ignition ON, verify the scan tool Engine Oil Level parameter reads OK.
    • If not OK 

      Refer to Circuit/System Testing.

    • Go to next step: If OK 
  3. All OK.
scientia non olet · About LEMON Manuals