LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Traverse LT, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays And Gauges >> Diagnostic Information and Procedures >> DTC P0520 >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON.
  2. Verify the scan tool Engine Oil Pressure parameter is Low.
    • If not Low 

      Refer to Circuit/System Testing.

    • Go to next step: If Low 
  3. Engine running.
  4. Verify the scan tool Engine Oil Pressure parameter is OK.
    • If not OK 

      Refer to Circuit/System Testing.

    • Go to next step: If OK 
  5. All OK.
scientia non olet · About LEMON Manuals