LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Traverse LT, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays And Gauges >> Diagnostic Information and Procedures >> DTC B0931 >> Circuit/System Verification

Circuit/System Verification

  1. Ignition - On / Vehicle - In Service Mode
  2. Verify DTC B0931 is not set.
    • If the DTC is set 

      Replace the component: K18 Compass Module

    • Go to next step: If the DTC is not set 
  3. All OK.
scientia non olet · About LEMON Manuals