Rear Body Structure Stop Lamp Replacement

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Procedure Rear Bumper Fascia Replacement
1	Rear Bumper Fascia Bolt Cap [2x]
2	Rear Body Structure Stop Lamp Screw [2x] CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
3	Rear Body Structure Stop Lamp Procedure Carefully pull the lamp rearward in order to disengage the locator pins from the body side outer panel. Disconnect the electrical connector. Transfer components as necessary.