Circuit/System Verification
- Ignition ON, headlamps ON.
- Verify the scan tool Rear Fog Lamps Switch parameter changes between Active and Inactive while commanding the rear fog lamp ON and OFF with the rear fog lamp switch.
- If the parameter does not change
Refer to Rear Fog Lamp Switch Malfunction.
- Go to next step: If the parameter changes
- If the parameter does not change
- Verify the rear fog lamp turns ON and OFF when commanding the Rear Fog Lamps ON and OFF with a scan tool.
- If the rear fog lamp does not turn ON and OFF
Refer to Rear Fog Lamp Malfunction.
- Go to next step: If the rear fog lamp turns ON and OFF
- If the rear fog lamp does not turn ON and OFF
- All OK.