Installation Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Chevrolet Suburban, and 2018 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.
- Hand start the spark plugs in the corresponding cylinders.
- Tighten the spark plugs to 20 N.m (15 lb ft).
- Install the spark plug wires onto the spark plugs.
CAUTION:
Refer to Component Fastener Tightening Caution .