LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Suburban 3500 HD LT >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Engine Controls And Fuel - 5.3L (L83) Or 6.2L (L86) - Repair Instructions) >> Repair Instructions >> Fuel Level Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Chevrolet Suburban, and 2018 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Fuel Level Sensor Tangs & Retainer
    GM1704575Courtesy of GENERAL MOTORS COMPANY
  1. Remove the fuel tank module. Refer to Fuel Tank Fuel Pump Module Replacement (SWB) Fuel Tank Fuel Pump Module Replacement (LWB) .
  2. Using a small pick like tool, push in the retainer (1) in order to disengage the electrical connector.
  3. Remove the fuel level sensor electrical connector from the module cover.
  4. Pull the level sensor locking tangs (2) out towards the outside of the module bucket.
    5. Fig 2: Fuel Level Sensor
    GM3638787Courtesy of GENERAL MOTORS COMPANY
  5. Slide the fuel level sensor (1) up.
    6. Fig 3: Fuel Level Sensor
    GM3638795Courtesy of GENERAL MOTORS COMPANY
  6. Remove the fuel level sensor (1) from the module.
scientia non olet · About LEMON Manuals