LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Suburban 3500 HD LT >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Engine Controls And Fuel - 5.3L (L83) Or 6.2L (L86) - Repair Instructions) >> Repair Instructions >> Evaporative Emission Canister Purge Tube Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Chevrolet Suburban, and 2018 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Clean all fuel and evaporative emission (EVAP) line connections and surrounding areas prior to disconnecting the lines in order to avoid possible fuel and/or EVAP system contamination.

    Fig 1: EVAP Canister Purge Tube
    GM3267064Courtesy of GENERAL MOTORS COMPANY
  1. Disconnect the EVAP canister purge tube (1) from the EVAP canister solenoid. Refer to Plastic Collar Quick Connect Fitting Service .
    2. Fig 2: EVAP Canister Purge Tube
    GM3267082Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the EVAP canister purge tube (1) from the EVAP pipe. Refer to Plastic Collar Quick Connect Fitting Service .
  3. Remove the EVAP canister purge tube (1) from the vehicle.
scientia non olet · About LEMON Manuals