LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Suburban 3500 HD LT >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Engine Mechanical - 5.3L (L83) Or 6.2L (L86) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Automatic Transmission Flex Plate Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Chevrolet Suburban, and 2018 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the automatic transmission. Refer to Transmission Replacement .
    2. NOTE:

    Note the position and direction of the automatic transmission flex plate before removal.

    Fig 1: Automatic Transmission Flex Plate, Bolts And Scuff Plate
    GM3260185Courtesy of GENERAL MOTORS COMPANY
  2. Remove and DISCARD the automatic transmission flex plate bolts (1).
  3. Remove the scuff plate (2)
  4. Remove the automatic transmission flex plate (3).
scientia non olet · About LEMON Manuals