LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Suburban 3500 HD LT >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Engine Mechanical - 5.3L (L83) Or 6.2L (L86) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Engine Front Cover Removal >> Camshaft Position Sensor Harness, Camshaft Position Sensor and Camshaft Actuator Magnet Removal

Camshaft Position Sensor Harness, Camshaft Position Sensor and Camshaft Actuator Magnet Removal

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Chevrolet Suburban, and 2018 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Camshaft Position Sensor Harness, Camshaft Position Sensor and Camshaft Actuator Magnet
GM3273619Courtesy of GENERAL MOTORS COMPANY
Camshaft Position Sensor Harness, Camshaft Position Sensor and Camshaft Actuator Magnet Removal

Callout Component Name
1 Camshaft Position Sensor Harness Bolts
2 Camshaft Position Sensor Harness
3 Camshaft Position Sensor
4 Camshaft Position Sensor Seal
NOTE:

Discard seal, it is not reusable.


Refer to Replacing Engine Gaskets .
5 Camshaft Actuator Magnet Bolts
6 Camshaft Actuator Magnet
7 Camshaft Actuator Magnet Gasket
NOTE:

Discard gasket, it is not reusable.