LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Suburban 3500 HD LT >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Engine Mechanical - 5.3L (L83) Or 6.2L (L86) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Crankshaft And Bearing Cleaning And Inspection >> Cleaning Procedure

Cleaning Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Chevrolet Suburban, and 2018 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Oil Passages & CKP Reluctor Ring Teeth
    GM1402145Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Use care when handling the crankshaft. Avoid damage to the bearing surfaces or the lobes of the crankshaft position (CKP) reluctor ring. Damage to the teeth of the CKP reluctor ring may affect on-board diagnostics (OBD) II system performance.

  1. Clean the crankshaft with solvent.
  2. Thoroughly clean all oil passages (2) and inspect for restrictions or burrs.
    3. WARNING:

    Refer to Safety Glasses Warning .

  3. Dry the crankshaft with compressed air.
scientia non olet · About LEMON Manuals