LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Suburban 3500 HD LT >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Engine Mechanical - 5.3L (L83) Or 6.2L (L86) - Diagnostic Information And Procedures) >> Diagnostic Information And Procedures >> DTC P06DA, P06DB, P06DC, P06DD: Engine Oil Pressure Control Solenoid Valve >> Component Testing >> Static Test

Static Test

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Chevrolet Suburban, and 2018 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition/Vehicle - Off
  2. Disconnect the electrical connector:Q44 Engine Oil Pressure Control Solenoid Valve
  3. Test for 10 to 30 Ω between the test points:Control terminal 2/B & Ignition terminal 1/A
    • If not between 10 to 30 Ω 

      Replace the component:Q44 Engine Oil Pressure Control Solenoid Valve

    • Go to next step: If between 10 to 30 Ω 
  4. Test for infinite resistance between the test points:Each terminal of the component & The component's housing
    • If less than infinite resistance 

      Replace the component:Q44 Engine Oil Pressure Control Solenoid Valve

    • Go to next step: If infinite resistance 
  5. All OK.
scientia non olet · About LEMON Manuals