LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Suburban 3500 HD LT >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Automatic Transmission - 10L80 (MF6) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Control Valve Assembly Disassemble >> Control Valve Solenoid Body Disassemble

Control Valve Solenoid Body Disassemble

WARNING: This page is about a different car, the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Cadillac Escalade ESV, and 2018 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Control Valve Solenoid Body
GM4522504Courtesy of GENERAL MOTORS COMPANY
Control Valve Solenoid Body Disassemble

Callout Component Name
1 Valve Body Bolt
2 Automatic Transmission Wiring Harness
3 Automatic Transmission Fluid Temperature Sensor
Procedure 
Lift up locking tab and turn sensor clockwise, then remove.
4 Automatic Transmission Fluid Pump Seal
NOTE:

DISCARD the seal.