LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Suburban 3500 HD LT >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Automatic Transmission - 10L80 (MF6) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Control Valve Assembly And Transmission Wiring Harness Removal >> Speed Sensors Removal

Speed Sensors Removal

WARNING: This page is about a different car, the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Cadillac Escalade ESV, and 2018 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Speed Sensors
GM4481985Courtesy of GENERAL MOTORS COMPANY
Speed Sensors Removal

Callout Component Name
1 Automatic Transmission Turbine Speed Sensor
NOTE:

The bolt is retained in the harness.

Procedure

  1. Disconnect the harness connector.
  2. Loosen bolt and remove sensor.
2 Automatic Transmission Intermediate Speed Sensor - A
NOTE:

The bolt is retained in the harness.

Procedure

  1. Disconnect the harness connector.
  2. Loosen bolt and remove sensor.
3 Automatic Transmission Intermediate Speed Sensor - B
NOTE:

The bolt is retained in the harness.

Procedure

  1. Disconnect the harness connector.
  2. Loosen bolt and remove sensor.
4 Automatic Transmission Output Speed Sensor
NOTE:

The bolt is retained in the harness.

Procedure

  1. Disconnect the harness connector.
  2. Loosen bolt and remove sensor.