Speed Sensors Installation

WARNING: This page is about a different car, the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Cadillac Escalade ESV, and 2018 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Speed Sensors

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Automatic Transmission Turbine Speed Sensor NOTE: The bolt is retained in the harness. Procedure Install Sensor and bolt. Connect to harness, green connector to green connector. Tighten 7 N.m (62 lb in)
2	Automatic Transmission Intermediate Speed Sensor - A NOTE: The bolt is retained in the harness. Procedure Install Sensor and bolt. Connect to harness, brown connector to brown connector. Tighten 7 N.m (62 lb in)
3	Automatic Transmission Intermediate Speed Sensor - B NOTE: The bolt is retained in the harness. Procedure Install Sensor and bolt. Connect to harness, blue connector to blue connector. Tighten 7 N.m (62 lb in)
4	Automatic Transmission Output Speed Sensor NOTE: The bolt is retained in the harness. Procedure Install Sensor and bolt. Connect to harness, blue connector to blue connector. Tighten 7 N.m (62 lb in)