Clutch Backing Plate Retaining Ring Specifications
WARNING: This page is about a different car, the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Cadillac Escalade ESV, and 2018 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
2-3-4-5-7-9-10 Clutch Backing Plate Retaining Ring
| Clutch Pack Travel Specification - 1.57 - 1.87 mm (0.061 - 0.073 in) | |
|---|---|
| Retaining Ring Thickness | |
| Metric | English |
|
NOTE:
After measuring clutch pack travel, determine if the measurement is within the specification. If the measurement is not within the specification, measure the thickness of the existing retaining ring, and then choose a thicker or thinner retaining ring that will bring the measurement within specification.
|
|
| 1.45 - 1.55 mm | 0.057 - 0.061 in |
| 1.65 - 1.75 mm | 0.064 - 0.068 in |
| 1.85 - 1.95 mm | 0.072 - 0.076 in |
| 2.05 - 2.15 mm | 0.080 - 0.084 in |
| 2.25 - 2.35 mm | 0.088 - 0.092 in |
4-5-6-7-8-9-10-Reverse Clutch Backing Plate Retaining Ring
| Clutch Pack Travel Specification - 1.22 - 1.52 mm (0.048 - 0.059 in) | |
|---|---|
| Retaining Ring Thickness | |
| Metric | English |
|
NOTE:
After measuring clutch pack travel, determine if the measurement is within the specification. If the measurement is not within the specification, measure the thickness of the existing retaining ring, and then choose a thicker or thinner retaining ring that will bring the measurement within specification.
|
|
| 1.45 - 1.55 mm | 0.057 - 0.061 in |
| 1.65 - 1.75 mm | 0.064 - 0.068 in |
| 1.85 - 1.95 mm | 0.072 - 0.076 in |
| 2.05 - 2.15 mm | 0.080 - 0.084 in |
| 2.25 - 2.35 mm | 0.088 - 0.092 in |
1-2-3-4-6-7-8-10-Reverse Clutch Backing Plate Retaining Ring
| Clutch Pack Travel Specification - 1.75 - 2.05 mm (0.068 - 0.080 in) | |
|---|---|
| Retaining Ring Thickness | |
| Metric | English |
|
NOTE:
After measuring clutch pack travel, determine if the measurement is within the specification. If the measurement is not within the specification, measure the thickness of the existing retaining ring, and then choose a thicker or thinner retaining ring that will bring the measurement within specification.
|
|
| 1.75 - 1.85 mm | 0.068 - 0.072 in |
| 1.95 - 2.05 mm | 0.076 - 0.080 in |
| 2.15 - 2.25 mm | 0.084 - 0.088 in |
| 2.35 - 2.45 mm | 0.092 - 0.096 in |
| 2.55 - 2.65 mm | 0.100 - 0.104 in |
| 2.75 - 2.85 mm | 0.108 - 0.112 in |
1-2-8-9-10-Reverse Clutch Backing Plate Retaining Ring
| Clutch Pack Travel Specification - 1.31 - 1.74 mm (0.051 - 0.068 in) | ||
|---|---|---|
| Retaining Ring Thickness | Ring Identification Color | |
| Metric | English | |
|
NOTE:
After measuring clutch pack travel, determine if the measurement is within the specification. If the measurement is not within the specification, measure the thickness of the existing retaining ring, and then choose a thicker or thinner retaining ring that will bring the measurement within specification.
|
||
| 2.23 - 2.36 mm | 0.087 - 0.092 in | White |
| 2.53 - 2.66 mm | 0.099 - 0.104 in | Green |
| 2.83 - 2.96 mm | 0.111 - 0.116 in | Yellow |
| 3.13 - 3.26 mm | 0.123 - 0.128 in | Blue |
| 3.43 - 3.56 mm | 0.135 - 0.140 in | Orange |