LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Suburban 3500 HD LT >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Automatic Transmission - 10L80 (MF6) - Diagnostic Information And Procedures) >> Diagnostic Information And Procedures >> Road Test >> Part Throttle Step-In Downshifts

Part Throttle Step-In Downshifts

WARNING: This page is about a different car, the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Cadillac Escalade ESV, and 2018 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the gear selector in the DRIVE position.
  2. Accelerate the vehicle at light throttle (5 - 15 percent) until 3rd gear is just achieved.
  3. Quickly increase throttle angle until commanded gear indicates that a downshift to 2nd gear is commanded.
  4. Verify that the transmission downshifts within 2 seconds of the throttle movement.
  5. Repeat steps 2 to 4 at higher speed to achieve 4th gear and then step in to command a 4th gear to 3rd gear downshift.
  6. Repeat steps 2 to 4 at higher speed to achieve 5th gear and then step in to command a 5th to 4th gear downshift.
  7. Repeat steps 2 to 4 at higher speed to achieve 6th gear and then step in to command a 6th gear to 5th gear downshift.
  8. Repeat steps 2 to 4 at higher speed to achieve 7th gear and then step in to command a 7th gear to 6th gear downshift.
  9. Repeat steps 2 to 4 at higher speed to achieve 8th gear and then step in to command a 8th gear to 7th gear downshift.
  10. Repeat steps 2 to 4 at higher speed to achieve 9th gear and then step in to command a 9th gear to 8th gear downshift.
  11. Repeat steps 2 to 4 at higher speed to achieve 10th gear and then step in to command a 10th gear to 9th gear downshift.
  12. Note any harsh, soft or delayed shifts or slipping. Note any noise or vibration.
scientia non olet · About LEMON Manuals