LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Suburban 3500 HD LT >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Engine Controls And Fuel - 5.3L (L83) Or 6.2L (L86) - DTC P0010 To DTC P0442) >> Diagnostic Information And Procedures >> DTC P0340 Or P0341: Camshaft Position Sensor >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Chevrolet Suburban, and 2018 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.

P0340 Condition 1 

Camshaft Position Sensor = No Signal - For greater than 5.5 s

Condition 2 

Camshaft Position Sensor = No Signal - For greater than 4 s - Starter is engaged.

Condition 3 

Camshaft Position Sensor = Less than 4 pulses - For greater than 3 s

Condition 4 

Camshaft Position Sensor = No Signal - During the first 2 engine revolutions.

Condition 5 

Camshaft Position Sensor = No Signal - During 200 engine revolutions.

P0341 Condition 1 

Camshaft Position Sensor = Less than 4 pulses - During 2 engine revolutions.

Condition 2 

Camshaft Position Sensor = Greater than 6 pulses - During 2 engine revolutions.

Condition 3 

Camshaft Position Sensor = Less than 398 pulses - Greater than 402 pulses - During 200 engine revolutions.

scientia non olet · About LEMON Manuals