LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Suburban 3500 HD LT >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Engine Controls And Fuel - 5.3L (L83) Or 6.2L (L86) - DTC P0010 To DTC P0442) >> Diagnostic Information And Procedures >> DTC P0335 Or P0336: Crankshaft Position Sensor >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Chevrolet Suburban, and 2018 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.

P0335 Condition 1 

Crankshaft Position Sensor = No Signal - For greater than 4 s

Condition 2 

Crankshaft Position Sensor = No Signal - For greater than 1 s

Condition 3 

Crankshaft Position Sensor = No Signal - During 2 engine revolutions.

P0336 Condition 1 

Crankshaft Position Sensor = Signal synchronization lost 10 times within 10 s.

Condition 2 

Crankshaft Position Sensor = Sync gap not detected. - For greater than 1 s

Condition 3 

Crankshaft Position Sensor = Sync gap not detected. - Since last starter engagement. - For greater than 2 s

Condition 4 

Crankshaft Position Sensor = Not between 51 and 65 pulses - During 1 engine revolutions. - For 8 out of 10 engine revolutions